Can a double pitch chain be used in aerospace applications?

May 16, 2025Leave a message

In the realm of aerospace engineering, the selection of components is a meticulous process that demands the highest standards of quality, reliability, and performance. As a supplier of Double Pitch Chains, I often encounter inquiries about the suitability of our products for aerospace applications. This blog post aims to delve into the technical aspects, advantages, and limitations of using double pitch chains in the aerospace industry.

Double Pitch Roller Chain

Technical Overview of Double Pitch Chains

Double pitch chains, including Double Pitch Roller Chain, Metric Double Pitch Chain, and Double Strand ANSI Roller Chain, are a type of roller chain with a pitch that is twice the standard pitch of a regular roller chain. This design feature results in a chain that is lighter and more flexible, making it suitable for applications where space and weight are critical factors.

The basic structure of a double pitch chain consists of inner and outer plates, pins, bushings, and rollers. The pins connect the inner and outer plates, while the bushings and rollers provide a smooth rolling surface for the chain to move along the sprockets. The double pitch design allows for a larger distance between the pins, which reduces the weight of the chain and increases its flexibility.

Metric Double Pitch Chain

Advantages of Using Double Pitch Chains in Aerospace Applications

  1. Weight Reduction
    One of the primary advantages of using double pitch chains in aerospace applications is the significant weight reduction. In the aerospace industry, every gram counts, and reducing the weight of components can lead to improved fuel efficiency, increased payload capacity, and extended flight range. Double pitch chains are lighter than their standard pitch counterparts due to the larger pitch and reduced material usage, making them an attractive option for weight-sensitive applications.
  2. Space Savings
    Another advantage of double pitch chains is their compact design. The larger pitch allows for a smaller number of links per unit length, which reduces the overall length of the chain and saves valuable space in the aircraft. This is particularly important in applications where space is limited, such as in the control systems and actuation mechanisms of aircraft.
  3. Flexibility
    Double pitch chains are more flexible than standard pitch chains, which makes them better suited for applications that require a high degree of flexibility. In aerospace applications, flexibility is often required to accommodate the movement of components and to allow for easy installation and maintenance. The flexibility of double pitch chains also reduces the stress on the chain and the sprockets, which can extend the service life of the components.
  4. Cost-Effectiveness
    Double pitch chains are generally less expensive than standard pitch chains due to the reduced material usage and simpler manufacturing process. This makes them a cost-effective option for aerospace applications, especially in applications where large quantities of chains are required.

Limitations of Using Double Pitch Chains in Aerospace Applications

  1. Load Capacity
    One of the main limitations of using double pitch chains in aerospace applications is their relatively lower load capacity compared to standard pitch chains. The larger pitch and reduced material usage result in a chain that is less strong and less able to withstand high loads. This makes double pitch chains unsuitable for applications that require high load capacity, such as in the landing gear and engine components of aircraft.
  2. Speed Limitations
    Double pitch chains are also subject to speed limitations due to their design. The larger pitch and reduced number of links per unit length result in a chain that is less able to maintain a constant speed and is more prone to vibration and noise at high speeds. This makes double pitch chains unsuitable for applications that require high-speed operation, such as in the transmission systems of aircraft.
  3. Environmental Conditions
    Aerospace applications often involve harsh environmental conditions, such as high temperatures, extreme pressures, and exposure to chemicals and radiation. Double pitch chains may not be able to withstand these conditions as well as standard pitch chains, which can lead to premature wear and failure of the components. In addition, the flexibility of double pitch chains may make them more susceptible to damage from vibration and shock, which can also affect their performance and reliability.

Considerations for Using Double Pitch Chains in Aerospace Applications

Despite the limitations of using double pitch chains in aerospace applications, there are still some applications where they can be used effectively. When considering the use of double pitch chains in aerospace applications, the following factors should be taken into account:

  1. Load Requirements
    The load requirements of the application should be carefully evaluated to determine if double pitch chains are suitable. If the application requires high load capacity, standard pitch chains may be a better option. However, if the load requirements are relatively low, double pitch chains may be able to provide a cost-effective and lightweight solution.
  2. Speed Requirements
    The speed requirements of the application should also be considered. If the application requires high-speed operation, double pitch chains may not be suitable due to their speed limitations. However, if the speed requirements are relatively low, double pitch chains may be able to provide a flexible and reliable solution.
  3. Environmental Conditions
    The environmental conditions of the application should be carefully evaluated to determine if double pitch chains are able to withstand the conditions. If the application involves harsh environmental conditions, such as high temperatures, extreme pressures, and exposure to chemicals and radiation, standard pitch chains may be a better option. However, if the environmental conditions are relatively mild, double pitch chains may be able to provide a cost-effective and lightweight solution.
  4. Maintenance Requirements
    The maintenance requirements of the application should also be considered. Double pitch chains may require more frequent maintenance than standard pitch chains due to their flexibility and reduced load capacity. In addition, the components of double pitch chains may be more difficult to replace and repair, which can increase the maintenance costs.

Conclusion

In conclusion, double pitch chains can be used in some aerospace applications, but their suitability depends on a variety of factors, including the load requirements, speed requirements, environmental conditions, and maintenance requirements of the application. As a supplier of Double Pitch Chains, we are committed to providing our customers with high-quality products and technical support to help them select the right chain for their specific application.

If you are interested in learning more about our Double Pitch Chains or would like to discuss your specific application requirements, please feel free to contact us. We look forward to working with you to provide the best solution for your aerospace needs.

References

  1. ASME B29.1 - 2011, Roller Chains, Attachments, and Sprockets
  2. ISO 606 - 2015, Transmission and conveyor chains, attachments and associated sprockets
  3. Aerospace Engineering Handbook, McGraw - Hill Education